The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing.
Detachable “Double Cone” chamber design to sterilize the ‘Double Cone” chamber In Autoclave.
Suitable for Inject able dry Powder Mixing.
Easy for loading and unloading.
Easy for cleaning.
All contact parts are made of stainless steel 316L material.
Two nos. of safety road will be provided at back side for safety operation. ( One LH side & one RH side )
Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.
One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.
Cone will be mirror polished from the inside & outside & structure will be matt polished.
All moving parts covered with SS304 covers.
Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
As per customer requirement machine will be provided with left side drive or with right side drive.
The conical shape at both ends enables uniform mixing and easy discharge.
Maximum care has been taken to ensure safe operation of the unit.
Worm reduction gear use for speed reduction.
Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
Inside & outside of the cone will be polished to the mirror finished.
General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model.
All safety guards & covers made out of SS304 in GMP Model. Hand wheel will be provided for manual tilting of cone.
Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.
Range of sizes for throughputs of between 25 and 3000 litres
The Ribbon Blender can be used in either batch or continuous flow form to achieve a homogenous blend of a wide range of materials. It is a widely used style of blender and can be found in the pharmaceutical, food, animal feeds, confectionery, chemicals, fertilizer, plastics, cosmetics, pigments and insecticides industries. It is suitable for the distribution of liquids, fragrances and slightly pasty components in micro dosages onto carriers.
Each unit consists of a horizontally-mounted, ‘U’-shaped trough containing a double helix blender bar and a longitudinal shaft of twin-bladed construction. Material is introduced and mixed by means of an agitator. The resultant mixing is gentle but with good shear and impaction.